Old Bus Photos

Rotherham Corporation – Daimler CVG – CET 76C – 76

Rotherham Corporation - Daimler CVG - CET76C - 76

Rotherham Corporation
1965
Daimler CVG6LX
Roe H39/31F

It’s an August Sunday evening in 1967 at the Chapeltown terminus of the service from Rotherham. Huddersfield had batches of almost identical vehicles but these Rotherham ones were classy – they had hopper saloon windows! I never travelled on a Rotherham example but I hope they had more comfortable seats than the thin lightweight ones favoured by Huddersfield. As a bus, they were pretty indestructible in service although at 7 year recertification most had fractured rear body crossmembers. Enjoy the livery, swept away in the monolithic era of the PTE.

Photograph and Copy contributed by Ian Wild


19/02/15 – 15:57

Leeds City Transport also had a batch of five of these vehicles, two of which are preserved. I enjoyed a ride on one last autumn at the Skipton running day. The Leeds buses were bought specifically for a service which was operated jointly with Bradford Corporation, which used forward entrance vehicles. Leeds otherwise stuck to rear entrances until the advent of rear engined buses.
I have never worked on forward entrance half cabs, but I wonder if there really was an advantage, or was it a case of following fashion? I have heard tales of conductors not liking them because there is nowhere to stand out of the way at bus stops. Certainly from the point of view of lower deck passengers, forward entrance buses had very poor forward vision.
I’ve always liked Daimlers, and this one is enhanced by the "streamlined" livery. The service number blind looks odd, was there a large gap between the two digits?

Don McKeown


20/02/15 – 07:45

Don, Rotherham buses (certainly up to the mid 60s) always had the gap between the two numeral blinds. How could I have forgotten the similar Leeds Daimlers? Not only did I operate them at both Huddersfield and Halifax but 874 frequently operates the free Worth Valley Railway countryside tour service when the weather is unsuitable for the open top ex Southdown PD3.

Ian Wild


20/02/15 – 16:35

Derby also had separated digits to the route numbers – they even had completely separate apertures. Many Derby residents took this a bit literally. The no.11 to "Kedleston Road/Allestree Lane" often being referred to as a "one-one" rather than eleven.

Stephen Ford


22/02/15 – 07:53

Rotherham – Chapeltown was service 16, although I can’t make out what is actually being shown.

Geoff Kerr


22/02/15 – 07:53

CET 76C_2

Best I can do with what I have I’m afraid, I have sharpened it up a bit. Looks like route 2_6 to me.

Peter


22/02/15 – 14:02

My 1971 timetable and a photograph I took in 1970 at the same location both agree with Geoff, so unless the service had been renumbered the bus is showing the wrong number.

David Beilby


23/02/15 – 07:34

Leicester also had separate apertures for both numbers and a third for the destination.

Chris Hough


23/02/15 – 17:14

The 26 service was to Aston, on the other side of the town, so perhaps the driver has simply put the wrong digit up. The destination showing is ‘ROTHERHAM’, of course, which is what the corporation buses showed when working back towards town.

Dave Careless


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

SELNEC PTE – Daimler CVG6 – TRJ 128 – 4017

SELNEC PTE - Daimler CVG6 - TRJ 128 - 4017

SELNEC PTE
1962
Daimler CVG6
Metro-Cammell H37/28R (Orion)

During the Selnec era, quite a number of ex-Salford buses were transferred to the former Manchester Corporation Depot at Queens Road. Most of these were Leyland Atlanteans and PD2’s, which would be quite at home among the ex-Manchester Leylands based here, although I wondered what the Queens Road crews made of the forward entrances on the PD2’s.
4017 (ex-Salford 128) was one of a handful of CVG6’s which moved from Salford to Queens Road. The latter depot had been home to Manchester’s only manual gearbox Daimlers, 4650 – 4, and occasionally elderly CVG6’s had spent their last days at Queens Road Depot on peak hour workings. However Queens Road was a firmly Leyland Depot, and I sometimes wonder how many drivers here were trained to use the preselector gearbox.
The bus is seen at Mills Hill Bridge, which had traditionally been the boundary between the operating areas of Manchester and Oldham Corporations. It was the half way point on service 59 (Manchester – Middleton – Oldham – Shaw) which was normally operated by 6 buses from each fleet. However on Sunday Mornings in pre Selnec times, the service was operated in two halves with passengers changing buses at Mills Hill Bridge. Both operators ran short workings to this point, Oldham as service 3 and Manchester as 59X.
Note the very small print on the standard Selnec destination blind. Obviously its a matter of opinion, but I thought the ‘Orion’ body suited the Selnec livery quite well.

Photograph and Copy contributed by Don McKeown


16/01/14 – 06:23

The manual CCG6 Daimlers made sweet music after the fashion of Guy Arabs – whose gearbox they shared – but were universally loathed by both Salford and Manchester drivers. [Apparently the Daimler installation worked less well than Guy’s own.] You’re not the only one, Don, who thinks an Orion can look good with the correct livery.

David Oldfield


16/01/14 – 06:24

What an interesting view! Thanks for posting, Don. Unlike most of the new PTE operations, which simply extended the livery of the biggest constituent with little or no variation, SELNEC went for a completely new livery. Some liked it, some were appalled, but they couldn’t ignore it. More orange below the lower deck windows may have helped to placate some observers – but it might have annoyed some of them even more!

Pete Davies


16/01/14 – 06:25

Would the (ex-)Salford CVGs have had air or spring-operated pre-selector gears? And why the split in the Sunday am service? a perception for the need for differing frequencies from each municipality perhaps?? . . . but with practices like that – and Oldham giving their half of the Sunday morning shorts a different number altogether – is it any wonder passengers went elsewhere?
Now, I’ve never driven a pre-selector: does it require "training" or can it be picked up "on the job"? are there aspects of driving manual/clash/crash/synchro/whatever that need to be put aside when driving a pre-selector? I must admit that I’ve felt wary of going near a pre-selector ever since I read about that nasty "kick-back" habit of spring-change pre-selectors . . . then again, I’ve enough trouble with throttle/clutch/shift without the added complication of shift/throttle/change (am I right there?).

Philip Rushworth


16/01/14 – 08:42

As an "amateur" with about twenty years experience of using my PSV (PCV) for various things – in fact most types of operation – I would say that type training is an essential but often overlooked element of the job. In an ideal world, that includes the difference between Synchro Manual, Crash Manual, Semi Automatic and Pre Select gear change.

David Oldfield


16/01/14 – 09:02

The Orion bodied vehicles probably came out best of all with the SELNEC livery, primarily because as there were more of this style of body than any other across the fleets absorbed into SELNEC, the final livery from a number of options was actually designed around drawings and hand made models of the body style (don’t forget this was before computer graphics) and the dimensions and spacings of the colours were then adopted fleet wide to the benefit of a few other body styles and the detriment of many. The orange was, however, distinctive and, to be controversial, not dull as it appeared to be in the shades and quantities chosen for Cardiff or Glasgow.
The photo highlights a number of issues. It would have been rare for a Salford or Manchester vehicle to be out on service for long with damage as seen on the radiator housing. The blind was a lash up job and, as there doesn’t seem to be any snow around, it looks as if the bus hasn’t been through the washer for some days. These were some of the problems faced by the new entity for some time after set up as old loyalties were, as one inspector said to me, smashed and blown to the four winds and some depots had almost a rebellious attitude to the new organisation. In addition there was a range of problems when transferring vehicles from depot to depot such as blind sizes. unfamiliar position of bells on rear entrance double deckers, position of fuel fillers and different interior light bulbs and of course different gear boxes, to name a few. The appearance of many vehicles rapidly deteriorated. Those left in their original schemes with the appropriate divisional motifs added (the Central blue S flash on Manchester’s red or Salford’s green looking particularly odd) were generally left without attention to dints and paint deterioration until full repaint, some waiting two or three years for attention or for withdrawal. All this added to the debate about the orange, which was by no means confined to the enthusiast fraternity, gave the management plenty to cope wit. Much had settled by 1973, then there was another upheaval with the advent of Greater Manchester Transport.

Phil Blinkhorn


16/01/14 – 11:02

…..but as a Sheffielder who spent student and early working days in SELNEC/GMT land, Sunglow Orange and White were infinitely superior to SYPTE Coffee and Cream. Darkening the coffee didn’t improve it. Only adding the red – just before wiping it away with Mainline Yellow and Red – made it just about acceptable. If only they HAD kept Sheffield Cream and Blue – but the better Manchester/SELNEC alternative would have been Salford Green and Cream – kept up to the latter day standards of Salford. […..but then it would have been some sort of green and cream from Merseyside, through Manchester to West Yorkshire!]

David Oldfield


16/01/14 – 11:03

I fully agree with the SELNEC livery looking good on the Orion. The original orange, sunglow I think it was called, was a very intense yellowish shade which looked especially attractive when freshly applied. However, it was prone to fading so that when the fleet was rebranded it was replaced with a darker, redder version. The difference can be seen quite well on these ex SHMD Daimlers: www.flickr.com/photos/  The off-white originally used was also replaced by brilliant white at some stage. I personally preferred the former combination but as livery is often a controversial subject that is a matter of opinion. The PTE liveries are often maligned but some of them worked well and looked bright and refreshing on the right vehicles at the right time. I always liked the original WYPTE ‘Metro’ livery with the stripe above the cab on the Roe bodied Atlanteans but on older vehicles it looked wrong. Merseyside used the same bluish Verona green which I thought looked very smart combined with jonquil yellow (a shade similar to the primrose used by East Yorkshire), especially on their Panthers. And, the final version of the Tyne and Wear livery with white rather than cream and royal blue lining has always been a personal favourite, especially on the Metropolitans. However, I would never deny that it was also something of a tragedy that magnificent liveries such as those at Halifax, Southport or South Shields were lost, and like the NBC liveries of the day, those of the PTEs were not helped by the loss of local pride that came with these huge, impersonal organisations.

Mike Morton


16/01/14 – 14:07

The question of appearance is highly subjective, but I remain an unapologetic loather of the Selnec ‘livery’ which looked particularly abhorrent when applied to front engined buses. The painting of the bonnet in orange, completely out of sympathy with the other lines of the scheme, made it look as absurdly conspicuous as a pantomime pirate’s eye patch. I have always disliked the Orion body, too. The straight taper from skirt panels to roofline, accentuated by the shallow upper saloon windows, gave the thing a gawky, ungainly, pin headed profile, which the cheap looking dome and glazing method merely compounded. Orange is a very tricky colour to adopt and maintain, as my time in Halifax revealed. HPTD buses emerging from the bodyshop with newly painted replacement lower panels resembled a patchwork quilt. Certainly, the Selnec scheme shows up body damage like a beacon. Salford would never have left the radiator cowl in that state, but even if it had, the missing slat would not have leapt so readily to the eye in that superb dark green livery. I will now don my hard hat in readiness for the onslaught from Selnec and Orion aficionados.

Roger Cox


17/01/14 – 08:25

I fully agree with Roger Cox regarding the SELNEC orange and white colour scheme it was one that was only ever going to look even reasonable when just out of the paint shop, considering the number of attractive colour schemes SELNEC inherited, MCTD’s being one of the least attractive, there were reasons to expect so much better. The Orion body was also an unattractive bus as it was unbalanced with the unequal depth windows and the inward taper from skirt to roof making it look very narrow and slab sided which looked even worse on a Regent V with a full front, the nasty tinny domes only made matters worse. Having said that if nobody had bought them how long would the design have lasted let alone been copied by Park Royal who managed to make a bad design even worse.

Diesel Dave


17/01/14 – 08:26

The livery certainly accentuates the Salford style of winding handles attached to a cumbersome-looking frame, designed to be reached without the need for the guard (sic)to climb on the radiator.

Geoff Kerr


17/01/14 – 09:19

The "tinny" domes were actually fibreglass with the outside smoothed and the inside almost always left rough so the passengers could view the fibres through the paint. They were prone to loads of condensation and vibration and used to crack to a greater or lesser extent. Manchester had many delivered with v shaped push window vents in the two front windows which helped the frontal appearance but they were removed and later orders had them omitted as, if the vents became stiff to move, the efforts of the passengers or guard to open or close them led to the whole window flexing and there were instances of major cracking and windows falling out as a result.

Phil Blinkhorn


17/01/14 – 17:53

Great to see a Middleton run featured and thanks Don for posting. Re the 3 and 59: the 3 (Oldham Corp) was Rushcroft to Mills Hill only. In 1968/9 every journey was extended to Middleton. All Sunday morning 59 runs were numbered 59x and ran only to Mills Hill until 11am, then through to Shaw. There were few passengers. Middleton had interesting routes and short workings, mostly forgotten now. Selnec livery? Yuk! Lots preferred the original liveries. These Daimlers were stunning when new teaming along the Crescent and better still if all the lights from Adelphi to Blackfriars were green.

Mike Franks


18/01/14 – 07:45

Mike, in my day as a teenager, the longer it took from Adelphi to Blackfriars the better, especially on a weekday afternoon in term time – go figure!

Phil Blinkhorn


18/01/14 – 07:46

To answer one of Philip’s questions, I’m pretty sure that all Salford CVG6s had spring-operated gearchanges. The spring operation went with vacuum brakes, whereas air operation went with air brakes. Salford stuck with vacuum brakes as long as possible, buying PD2/40s when their allegiance changed to Leyland. I would imagine their CCG6s were vacuum braked too, whereas Manchester’s were definitely air-braked.
Talking of which (David), I didn’t know the Guy gearbox behaved differently in these than in its native Arab. I wonder if it was perhaps in the wrong place. Guy always put it amidships, so if Daimler put it at the front, it would need a different linkage. Whilst it is very nearly true that they were universally loathed, there was one driver who loved them – a certain Ron Barton, whose book "Manchester Buses from the Platform" has just been published. I haven’t read it, but I should be rather surprised if he doesn’t mention the CCG6s.

Peter Williamson


19/01/14 – 08:21

There was nothing wrong with the Guy gearbox. The constant mesh box was always disliked in fleets with a preponderance of preselective, semi auto or even synchromesh transmissions. The constant mesh gearbox required a degree of familiarity and skill for clean changes that drivers in mixed fleets did not (or could not be bothered to) acquire. The staff in neighbouring Tilling or BET fleets would have wondered what all the fuss was about.

Roger Cox


19/01/14 – 09:41

I like the way this is wandering into the realms of the merits or otherwise of different gearbox arrangements!
In mid career, my duties with Southampton City Council began to involve what had been the Transport Department (by 1990 well into the deregulation era) and I encountered someone who was about to retire from that undertaking. He was telling me one day that he had started work with Provincial. All crash gearboxes. His instructor had mentioned – vaguely – double declutching, and had dismissed the idea as being for amateurs. "Listen to the engine, boy, and you can go straight through!" How would today’s drivers manage???

Pete Davies


19/06/17 – 07:14

As a former employee based at the Weaste Garage. The transfer of Salford vehicles to Manchester Queens Road due to the interest being shown by the ‘Ministry’ in the ‘presentation’ of Manchester vehicles.
To placate the ‘Ministry’ overnight Salford vehicles in good order were transferred to Queens Road and conversely Queen Road relics arrived at Weaste and Frederick Rd. To say the least engineering at the former Salford undertaking were not the least happy with the transfer.

Robert Walsh


20/06/17 – 07:19

Could someone confirm that Salford Daimlers 111-146 had spring operated gearboxes and vacuum brakes?

David Call


21/06/17 – 07:19

Selnec livery. As a student in Manchester in the early 1970’s I was recruited by SELNEC to assist with an evening survey in Wythenshawe. Being a loyal employee, I equipped myself with a felt tip pen in Selnec’s house colour, orange, to complete my survey forms. I rapidly discovered that the neon street lighting in Wythenshawe made the form itself orange which meant that it was impossible to see whether anything had been written.

Peter Cook


21/06/17 – 07:20

My early comments (16.01.14) about gearbox set-up were purely hearsay on my part. Having subsequently driven a "crash" Guy, I would say that (once one has learned to drive it properly) it was one of the sweetest gear-changes I have come across.

David Oldfield


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

Burwell and District – Daimler CV – PHP 220

Burwell and District - Daimler CVG 6 - PHP 220

Burwell and District Motor Services
1952
Daimler CVG6
Northern Counties H33/28R

Burwell and District was a small company based in the Cambridgeshire village of that name, just to the north west of Newmarket. Like many such operators, it began just after WW1 when Mr Mansfield, a cycle and motor agent in the village, bought a 20 seat Model T Ford and ran a bus service to Cambridge. Other routes were developed, and, by the time of the 1930 Road Traffic Act, the firm had services to Bury St Edmunds and Ely in addition to the major route to Cambridge. Further stage carriage operations were added, and excursions and tours became an important element of the business, so much so that, from 1933, apart from a solitary Dennis Ace bus bought in 1938, all the vehicles purchased were coaches. The heavy passenger loads during the Second World War brought about the reversion to bus configured vehicles, and in 1941 the first double decker appeared. Several more followed as the war progressed, including three CWA6 utilities. In the post war period, clearly impressed with the Coventry product, the firm standardised on Daimler chassis for many years, though latterly AECs, particularly Reliances, became increasingly favoured. Secondhand purchases predominated from the late 1960s onwards until 1979, when the owners sought to retire. Attempts were made, in vain, to sell to another independent operator but 6th June 1979 saw the last journey run by the brown and cream buses. The following day Eastern Counties Bristols took over, and the entire Burwell fleet was put up for disposal. A full history and fleet list for Burwell and District may be found here: www.petergould.co.uk/burwell1.htm
PHP 220 was a Daimler CVG6 demonstrator of 1952 with a Northern Counties H33/28R body bought by Burwell and District in 1956 and withdrawn in 1972. It is seen here on 26th August 1959 in Drummer Street bus station, Cambridge (nowadays altered beyond recognition from its early layout) leaving on its way to Soham. It is passing one of the numerous Eastern Counties lowbridge K5Gs. Eastern Counties had very few low bridges in its territory, but allocated lowbridge double deckers to most of the country routes, keeping the highbridge fleet employed mainly on the Norwich and Cambridge town services. The contrast in refinement between the preselective, flexibly mounted, six cylinder highbridge Daimler and the rigidly mounted, five cylinder, constant mesh, lowbridge Bristol could surely not have been greater.

Photograph and Copy contributed by Roger Cox


01/09/13 – 14:42

I well remember being very impressed by this lovely vehicle when, as a demonstrator, it was on loan to Leeds City Transport. I recall seeing it near the Town Hall on service 42 to Lower Wortley – can anyone recall if it was in some kind of deep purple, very dignified, or is the grey matter here really failing now ??

Chris Youhill


02/09/13 – 06:00

I was on that very last journey on June 6th 1979 and still have the ticket to prove it. It was operated by four Fleetlines and there was a certain amount of jockeying for position by the drivers in order to claim the title of the last Burwell bus to leave Drummer Street Bus Station. Our bus (9 DER) driven by Jim Neale, a relation of the Mansfield family, gained that honour although it wasn’t the last to arrive back at the depot. I recall that villagers stood at their garden gates and waved goodbye as the final service passed by.

Nigel Turner


02/09/13 – 08:00

Chris, Peter Gould gives the production date of PHP 220 as 1952, but Paul Carter, a highly respected expert on East Anglian operators, says it dates from 1954. When was it on loan to Leeds? Can anyone verify the issue date of the registration? I plumped for 1952 in the above text as the 1954 date seemed rather late for a demonstrator of such a very well established vehicle type.

Roger Cox


02/09/13 – 08:00

Volume 4 of Leeds Transport says that it was on loan from 24 August to 14 September 1954 and the livery was "maroon and cream without lining".

Trevor Leach


02/09/13 – 16:15

Many thanks for that reassurance Trevor – at least my memory of the colour, while not 100% accurate, wasn’t too far wide of the mark. Mind you,in September 1954 I had other things on my mind, having just received from Her Majesty such a kind invitation to join her troops in blue on October 20th for a two year "event".

Chris Youhill


02/09/13 – 16:15

Regarding the issue date of the registration of PHP by Coventry. I have two books which give details of various histories, issue dates, etc, of UK registrations. Both agree that Coventry started to issue PHP in July 1954. The next mark (PRW) followed in September 1954. So this would narrow down PHP220 to the summer of 1954. If the chassis dated from 1952 as suggested above, perhaps it was used by Daimler for it’s own internal purposes (or on trade plates?) before it’s use as a demonstrator. That’s just my speculation – I have no documentary evidence on Daimler’s use of the chassis, or when the body was built.

Michael Hampton


02/09/13 – 16:15

Bus Lists on the Web gives the date new as being 1954.
I last saw the bus in a yard in Northwich in 1972
But according to the recent PSV Circle publication regarding Daimler Chassis Numbers 16685 etc, the bus was built in 1952 as the 4th prototype CL lightweight chassis. Bodied in 1952 and first registered as a demonstrator in 1954. Sold to Burwell and District in March 1956. Re-designated as a CV by Daimler.
I also think that the shot above was photographed at Middlewich not Northwich.

Stephen Bloomfield


03/09/13 – 06:00

‘A History of Motor Vehicle Registrations in the United Kingdom’ by L.H. Newall shows that the County Borough Council of Coventry issued PHP marks from 7/54 until 9/54.

Stephen Howarth


03/09/13 – 06:00

‘Bus Lists On The Web’ gives a date new of 1954 on the Northern Counties body list, and the chassis number seems to point to much the same date. Coventry’s 1951/2 batch of CVD6s had KVC registrations, and their next delivery, CVG6s delivered in 1955/6, were RWK. So all the evidence appears to indicate that when this vehicle was on loan to Leeds, it was very, very, new.

David Call


03/09/13 – 16:30

Stephen’s account of the history of this vehicle is endorsed by Alan Townsin’s book on Daimler published by Ian Allen. If I had looked in my copy first I would have found the answer. He says that chassis 18337 was one of the CL prototype lightweight chassis of 1952, which suggests that it began life with a Gardner 5LW engine and the power hydraulic braking system of the CD650. It eventually emerged for psv use as PHP 220 with a lightweight Northern Counties body in 1954, by which time it had become a CVG6 with conventional vacuum brakes.

Roger Cox


03/09/13 – 16:30

I understood that the reason for lowbridge buses in the Eastern Counties fleet was the restricted headroom in their Ipswich depot and bus station.

Geoff Kerr


19/10/13 – 17:19

PHP 220 was acquired by B&D on 5th April 1956 and sold on 7th January 1972. While with B&D air brakes and gear change were fitted.

Jim Neale


16/03/16 – 15:34

Jim, the air-operated preselector was quite new to Daimler in 1954, having been announced that year as an option on the Freeline; according to a leaflet somebody sent me a scan of.

Stephen Allcroft


17/03/16 – 10:48

Stephen, the newest B&D Freeline with vacuum brakes was NVE 1, built in 1954. only the last 2, built in 1958/58 had air brakes and gearchange.
An amusing anecdote regarding the air-change on PHP was of a part-time driver, not familiar with the system parking on the bay in Drummer St. bus station leaving it in reverse gear. (i.e not engaging neutral by depressing the pedal after selecting). After tea-break and a slight air-leak when the engine was started the bus was stuck in reverse gear which required half of the bus station to be cleared while the embarrassed driver reversed round far enough to build up enough air-pressure to disengage reverse and then engage a forward gear to proceed.
The same P/T driver was also embarrassed a few years later when driving a Fleetline for the first time. He parked in Drummer St., opened the door with the gear selector and stopped the engine. When it was time to depart he pressed the starter button and nothing happened as the gear selector was still in the door position. After a few moments fiddling and no sign of life the Conductress was about to go to the phone box to call for assistance. I was a 16 year old passenger sitting on the back seat and knew what to do so made my way to the front of the bus, flicked the gear selector in to neutral and pressed the starter button and we were away.
I don’t think the driver liked being shown up by a teenager like that but I went on to drive many more miles in that bus than he ever did!

Jim Neale


17/03/16 – 15:19

I’ve one question from your original post info, Roger. Did the family sell the company to Eastern Counties in the end, or at least the goodwill, since EC didn’t buy their vehicles?

Chris Hebbron


17/03/16 – 15:20

Jim. Vacuum braked Freelines? I have only previously heard of hydraulic or air.

Stephen Allcroft


18/03/16 – 05:38

Stephen, To be honest I am not sure about the difference between vacuum and hydraulic brakes. I know the earlier Freelines did have a peculiar system which also involved the gear-change pedal but my experience driving them was very limited and I was only 21 at the time as most buses and coaches that I have driven have had air brakes.

Jim Neale


18/03/16 – 05:39

Yes, Chris, according to Paul Carter in his writings on Cambridge area operators, Burwell sold out to ECOC after all other approaches to independents proved fruitless. Paul’s book, "Cambridge 2", includes some reminiscences by Jim Neale about his time with Burwell & District and afterwards – well worth a read. Turning to the Freeline braking question, I, too, can find no reference at all to a vacuum braked option. The power hydraulic braking system with which Daimler became rather besotted was the standard fitment to the Freeline, but Daimler very quietly introduced an air braked option in 1952. I cannot discover just how many Freelines had air brakes, but surely the eight that went to Great Yarmouth must have been so fitted. Geoff Hilditch is unremitting in his loathing of the brakes of the Halifax CD650 ‘deckers. He would assuredly not have ordered Freelines with the hated hydraulic system. Incidentally, the Freeline had a high driving position because the spare wheel was located beneath the floor at the front of the chassis. On the subject of the power hydraulic braking, steering, gearchange system, one wonders why Daimler became so wedded to this arrangement. The AEC Regent III had shown the way forward with air operated brakes and gearchange, and power assisted steering was always a possible extra fitment to any chassis if required. Daimler had previously adopted air brakes entirely successfully in its trolleybus chassis from 1936 onwards, so the firm was fully familiar with the system. Power Hydraulic braking was never popular with the operating industry, and apart from the special cases of London Transport’s RMs and Midland Red’s D9s, bus operating engineers elsewhere generally kept well clear. Those chassis that did have the full hydraulic system didn’t sell very well, witness the Dennis Lancet UF, Foden PVD/PVSC and the Tilling-Stevens Express MkII. No doubt other correspondents can think of some more examples.

Roger Cox


19/03/16 – 06:42

G. G. Hillditch did indeed specify air-operated brakes and gears (Daimatic) on FEX 524-5 and AEX 18-20B: he also had fitted Gardner rather than Daimler engines. He detailed the specification process in "Looking At Buses".

Stephen Allcroft


12/05/16 – 15:53

Some pictures of the last days of Burwell & District may be found here:- //angliaandthamesvalleybusforum.com/index.php?

Roger Cox


24/08/16 – 06:03

With reference to Stephen Allcroft query re: Freeline vacuum brakes. I think what Jim meant was "Servo (vacuum) assisted hydraulic system" Lockheed called this "continuous flow system" It was also use3d on a lot of early Routemasters.

Lindsay Hancock


 

Quick links to the  -  Comments Page  -  Contact Page  -  Home Page

 


 

All rights to the design and layout of this website are reserved     Old Bus Photos does not set or use Cookies but Google Analytics will set four see this

Old Bus Photos from Saturday 25th April 2009 to Wednesday 1st May 2024