Old Bus Photos

Maidstone & District – Leyland Panther – LKT 132F – 3132

Maidstone & District - Leyland Panther - LKT 132F - 3132

Maidstone & District
Leyland Panther PSUR1/1R
Strachans B48F

LKT 132F is a Leyland Panther PSUR1/1R new to Maidstone & District in 1968. It has a Strachan B48F body, somewhat unusual for a BET firm, and we see it in the Netley rally on 14 July 1996 so the body at least is more or less ‘home’ as Strachans later products were built just along the road in Hamble. The Parish Council calls it Hamble Le Rice now, and it’s nothing to do with puddings. In this sense, it means ‘rich’.

Photograph and Copy contributed by Pete Davies

20/11/16 – 15:48

Yes its a standard BET front, but the livery does a great deal to hide the uneven window and panel spacing layout. Just by example if you were to look at Liverpool 1097 currently in the heading on the ‘other’ bus blog page, it shows how neat this one really is. Its a pity we don’t have sound on here as Panther exhausts were in a class of their own.

Mike Norris

21/11/16 – 07:54

Mike there is a section on here for bus noises. To be found at the ‘More pages’ tab top right in the menu, then select ‘Old Bus Sounds’.

Stephen Howarth

05/11/17 – 07:30

With reference to 3251 (ex SO251) as I knew it when I drove it. This was always a delightful vehicle to drive and was usually requested by our depot engineer – Ernie Marks – at Gravesend. I remember using it on many runs to High Halstow, Cliffe and also Meopham & Harvel. I have a photo slide of it taken when I used it.
With reference to S1-S5 or 3701-5, again when I drove all of them, these would often tread there way onto the 122 London to Brighton run and I had the pleasure of driving them between Gravesend and Tunbridge Wells. The only problem I found was the bodywork rattle caused by over-inflated tyres, something which Tunbridge Wells was usually in favour of. Hence, all vehicles from both garages had bodies that were shaken to pieces – sometimes almost literally!

Freddy Weston

09/11/17 – 07:14

Although my memory is not so good nowadays, I have to hand a fleet allocation list for 1st October 1971. From that it looks as if Freddy’s and Ernie Marks’ favourite Reliance 3251 had left the fleet by then. 3701-6 are shown as allocated to Tonbridge and 3125 was allocated to Maidstone. With regard to comments about high tyre pressures, it is relevant that M&D had three tyre mileage contractors in 1970. I think Gravesend and possibly Borough Green were covered by Michelin who would only have used radial ply tyres which have more flexible walls. The Tunbridge Wells district (inc Tonbridge, Hawkhurst and Edenbridge) was covered by Firestone with cross ply tyres which may have felt harder. Dunlop was the third contractor. This made it a bit difficult when vehicles were re-allocated across contracts! Around 1971, Dunlop were contracted to cover the whole fleet using a new centralised tyre workshop for fitting new and re-grooving tyres. Mobile inspectors examined the fleet regularly for pressure and tread depth. Each depot had a supply of wheel assemblies with fit tyres for failures in service. An interesting aspect of this was that quite a few vehicles were found to be fitted with wheels of the incorrect offset, so a supply of new wheels had to be bought to facilitate a sorting out!

Geoff Pullin

PS – I meant to add that Panthers 3131 and 3135 were delicensed for repair of fire damage and 3127 for major body repairs! Engine compartment fires were a bit endemic for Panthers and also Reliances at the time. As I have said elsewhere, M&D found that the Willowbrook bodied Panthers were better than the Strachans bodies which suffered a lot of panel movement and aluminium dust permeating the insides. They were strengthened by a scheme devised by Wiollowbrook!


Quick links to the  -  Comments Page  -  Contact Page  -  Home Page



Lancaster City Transport – Leyland Panther – LTC 109F – 109

Lancaster Corporation - Leyland Panther - LTC 109F - 109

Lancaster City Transport
Leyland Panther PSUR1/1R
East Lancs B53F

LTC 109F fleet number 109 is a Leyland Panther PSUR1/1R with East Lancs B53F body, new to Lancaster in 1968. The batch was in maroon and cream livery then, but we see it in ‘post merger’ livery of blue and white, on the sunny evening of 20 May 1975. The scene is Lancaster’s Damside Street Bus Station. 389 JTD a 1959 Tiger Cub is behind, still in the old livery but with the Tilling style of fleetname adopted as an interim measure for Lancaster and Morecambe & Heysham vehicles, together with what looks like another Panther on the extreme left of the view.

Photograph and Copy contributed by Pete Davies

24/04/16 – 09:09

In late 1979 LTC 109F came to Derbyshire when, in company with Morecambe and Heysham AEC Swift UTJ 908H, it joined Woolliscroft Silver Service fleet at Darley Dale. Initially they were on loan from Lancaster City but were purchased outright soon after arrival. The Panther bore a strong family resemblance to a batch of Neepsend bodied Panthers at nearby Chesterfield, these Neepsend bodies being built under license from East Lancs. LTC 109F lasted a couple of years but was eventually stripped for spares and the remains had been scrapped by 1982. The Swift lasted a little longer going to North at Sherburn in 1983.

David Hargraves

24/04/16 – 10:43

My original slide includes the Ribble PD3 with Metropolitan Cammell body which some members may have spotted on the extreme right It is from the PCK series. Lancaster had six of these Panthers, in two trios: GTC 104-106F from 1967 and 107-109F from 1968.
David comments on a number of supposed ‘East Lancs’ products being bodied by Neepsend. Some of Southampton’s later Regent V fleet were products of this arrangement and I think I’ve read somewhere that many think Neepsend was a subsidiary of East Lancs, but they were in fact part of the same group. Wrong again, Davies?

Pete Davies

24/04/16 – 12:42

Just a clarification re. Pete’s comment, the registrations of the second batch of three Panthers were LTC-F.
Lancaster reverted to Leopards for its next deliveries.

Dave Towers

24/04/16 – 18:33

Thanks, Dave. I must fire my proof reader!

Pete Davies

26/04/16 – 14:57

East Lancs were owned at the time by John Brown engineering who were based originally in Sheffield They re activated bus building in Sheffield at a factory on Neepsend Lane using East Lancs designs.
So really Neepsend were never an East Lancs subsidiary but both were part of the John Brown empire.
Sheffield took some rear engine chassis from them in 1964/65 The firm (I think) built one more body on a Bedford VAS chassis for Sheffield but by this time it was called Cravens Homalloy.

Chris Hough

27/04/16 – 05:54

Thanks, Chris. I’m glad that the old grey cells have not failed me this time.

Pete Davies


Quick links to the  -  Comments Page  -  Contact Page  -  Home Page



Ribble – Leyland Panther – ACK 774B – 774

Ribble - Leyland Panther - ACK 774B - 774

Ribble Motor Services
Leyland Panther PSUR1/2RT
Marshall DP49F

Odd man out in the Ribble fleet for over ten years was the first production Leyland Panther, which I photographed outside the September 1964 Earls Court Commercial Motor Show.
It is possible that it entered Ribble service for a spell before the show, and early on in its career it ran on the Blackpool to London service, presumably on hire to Standerwick. It operated from Preston garage for most of its life. Withdrawn from service in 9/75, no further owners are known to me.
Photographs of it actually in service are few and far between, the few I have seen are usually on private hire work.
Any recollections or in service photos would be of great interest!
It seems that Panther coaches were not too common.
From ‘Bus Lists On The Web’ and Doug Jack’s ‘Leyland’ book, I see that there were some other PSUR1/2 coaches for the home market, as follows:

15 for East Yorkshire in 1966, with Marshall bus bodies! B49F (why use a coach chassis you may ask!)
2 for East Yorkshire with Metro Cammell C44F bodies in 6/67
4 for East Yorkshire in 1/68 with Marshall DP49F bodies
5 for East Yorkshire in 1968 with Plaxton C44F bodies
1 for Soudley Valley Coaches, Glos in 11/66 with Plaxton C51F body
10 for Seamarks of Westoning, Beds with O.680 engines and Plaxton C51F bodies in 1968 (full air change ?)
6 for Seamarks with Plaxton C51F bodies in 1969
4 for Skills of Nottingham, two in 1969 and two PSUR1B/2R in
1971 all with Plaxton C51F bodies

Photos of any of these would be of interest.
Many more were exported, which was also the case with the bus version, which did well in Australia.

Photograph and Copy contributed by Peter G Greaves

This unique Panther was the reason that Ribble continued to buy large numbers of Leopards (bus, DP and coach versions) and ultimately why they became a major RE user. It was a disaster. Unreliable, it probably slept in the corner of Frenchwood for much of its life and was condemned to private hire to avoid the (bad) publicity of breakdown on high profile long distance express services. The sad fact was that the Leopard was reliable, the Panther not.
Some, including Preston Corporation and the Aussies, persisted with the Panther and seemed to make it work but most British operators – including Manchester – had similar experience. It put back the case for low(er) floor vehicles for some years – and certainly until the RE was made available on the open market later in the decade.
[I think that you will also find that Maidstone and District had similar numbers and types of Panther as East Yorkshire.]
This must also have been a fairly early Marshall body for both Ribble and BET – who became a major, and repeat, customer of this well built body. [Even stars have Achilles heels though and I gather in grand old age – ie in preservation – some Marshalls need quite a bit of tlc, otherwise their front platform can fall off!]
The East Yorkshire Met-Camms were full coaches of the Topaz design – although I seem to remember that that was the "Bedford" designation and that Leylands had a different name. After closure of Weymann at Addlestone, Metro-Cammell took on the mantle of coaches from the line of the Fanfare and Castillians. They were true coaches but they never realised a balanced design that pleased either generally or, indeed, as a coach.

David Oldfield

All the early rear-engined single deckers – Roadliner, Panther, Panther Cub and Swift/Merlin – were pretty disastrous, apart from the Bristol RE, which possibly benefited from having the radiator at the front and the engine mounted slightly further forward than the others.
As you say, some operators persevered, and Sunderland reckoned that by the time they got it right the Panther was a really good vehicle. Their experience included a comparison of bodies between MCW’s, which was attached to the chassis throughout, and a much more successful effort by Strachan which featured a separate cantilevered subframe supporting the rear end of the body, allowing the chassis to go its own way.
According to Stewart J Brown’s "Luxury Travel" book, the East Yorkshire MCW coaches were designated Topaz II.

Peter Williamson

03/09/11 – 05:41

This machine was used in the late 60s and early 70s at various times in addition to Private Hire on Stage Carriage and on two or three times to my knowledge on the X30 Preston to Glasgow, X11 Preston Edinburgh and the X20 Preston to Glasgow Night Service Express. As these services operated as a duplicate to the peak season service from Manchester and Liverpool any coach or DP could be used from Preston.

Brian Cowdall

04/09/11 – 07:54

I always disliked this type of incongruous sharp cornered radiator grille on otherwise handsome bodies. They gave the impression of having been assembled "in house" from spare material after possible accident repairs and never looked right to me.

Chris Youhill

12/01/14 – 09:15

I travelled on a Ribble bus tour in 1963 from London to Nairne and back to London. I still have the original ticket and bus itinerary. I also have a photo of the bus and the driver. I was 18 years old and as I was the youngest on the tour I was nominated to get married at Gretna Green to the bus driver. (who was married with children). They are happy memories.


12/01/14 – 11:10

Coach tours can be friendly like that, Pam, even today!
I re-read these posts, David O, and you made mention of the closure of Weymanns at Addlestone, just down the road from you. I wondered if there was the slightest trace left of their factory, or even the name applied to a business park, a plaque in the pavement, or……anything?

Chris Hebbron

12/01/14 – 17:11

Would there be any chance of having a copy of the picture you have of the Driver and Coach for my website.
This is at http://www.psvbadges.org.uk
I have a page for Driver and Conductor pictures.
Thanks very much

Stephen Howarth

13/01/14 – 08:33

Chris. Sadly the answer is no, no, no and no. It is "covered" by speculative offices and the name Aviation Park – reflecting its use BEFORE Weymanns.

David Oldfield

14/01/14 – 08:13

I’ve just noticed the advertisement for the Ford Corsair – if people hadn’t taken photographs of buses how much of this incidental history would have been lost? Anyway, this has reminded me of something that bothered me a few years ago: the Corsair was presumably around at the same time as the Cortina MkI, but the Cortina lived on and the Corsair didn’t – can anybody slightly longer in the tooth than myself tell me whether the Corsair was positioned above or below the Cortina.
Anyway, back to the bus. Were all the problems with the chassis? or might some have been down to the bodybuilders failing to account for the stresses caused by the flexing of all that weight at the rear – Strachans’ bodies were cantilevered I think, allowing the rear-end to flex, and didn’t suffer the problems that led, I believe, to a batch of Willowbrook(?)-bodied single-deck Fleetlines in the Northern fleet almost cracking open. As the RE’s engine was situated further forward than on other types then that would have reduced the stresses on the bodywork.

Philip Rushworth

14/01/14 – 09:44

Re the Corsair, the first thing to understand is the Ford line up in the UK in the mid 1960s. The bottom of the range was the Anglia, next came the Cortina, then the Corsair, after which the Zephyr and Zodiac topped off the range. Each type had a range of factory options so each model was in effect a range within a range.
The Ford Consul had been produced until 1962 as the bottom tier of the Consul/Zephyr/Zodiac range. Ford then used the Consul name in a different way producing the Consul Classic 4 door and the Consul Capri two door until the end of 1963. The types were not to the public’s taste and disappeared at the end of 1963. The bottom tier of the Consul range became the Consul Cortina, generally known as the Cortina Mk1.
The Corsair first appeared at the 1963 Motor Show as the Consul Corsair as a replacement for the Consul Classic and went on sale in 1964. It was positioned above the Cortina and was offered in various versions. Originally powered by 1500cc Kent series in line engines, in 1965 the engine was replaced by a V-4 1600cc unit which contributed to the cars deteriorating sales from then on as it was noisy, rough and not as responsive as the 1600E Cortina Mk 2 which took many Corsair customers. Ford had introduced a 2000cc engine for the Corsair but its price point only worked in favour of the 1600E. The company also produced a Corsair 2000E aimed at competing, with of all things, the current Rover range but the cache off the Rover name meant more than price to most customers at that level.
When I worked for United Biscuits in 1967 we reps had Cortina 1300s and the area managers had 1600cc powered Corsairs.
In 1970 Ford re-jigged its range. The Escort, which had appeared in 1968, replaced the Anglia and also appealed to 1300cc basic Cortina Mk2 buyers so the Mk3 Cortina was a bigger car than the Mk2 and replaced the more expensive Mk2s and the Corsair. By 1972 the Zodiac/Zephyr had gone and were replaced by the Granada. With 310,000 Corsairs sold and a demand for a larger than Cortina but cheaper than Granada model appearing, Ford reintroduced the Consul name using the Granada body with a V-4 1996c engine and a V-6 giving 2495 cc. I had one of the former which was as horrible as the V-4 Corsair but I later had 2000cc Pinto engined Consul produced from 1974 and that was some car.

Phil Blinkhorn

14/01/14 – 10:09

Phil, there’s a lot of anecdotal evidence about bodywork on the first generation rear engined single deckers of the 1960’s, but I’ve never seen any formal article produced about the subject. I’m sure many of us can trace articles or even books which cover the faults and failings (and good points?) of Leyland Panthers, AEC Swifts, Daimler Roadliners, and Seddon Pennine RUs. (I’m omitting the very first of all – the Bristol RE – both Bristol and ECW got that right!). But I have yet to discover anything formal about the merits of the bodybuilders, such as Marshall, MCCW, Strachans, Park Royal, Alexander, etc. The most that appears are hints such as those related on this site, or similar letters in magazines such as Classic Bus. It would be great if "someone out there" with the knowledge and/or the contacts to research this topic could thoroughly explore the topic and produce a definitive paper on it. Chassis manufacturers have had a fair share of material written about both their successes and failures – so why not the body builders?

Michael Hampton

15/01/14 – 05:51

The Plaxton Derwent bodied Roadliners at PMT survived quite well whereas the Marshall bodied ones simply broke their backs. The Derwent was timber framed where the Marshall was steel framed. I’m not sure it’s necessarily quite as simple as that. The Seddon RUs with Pennine dual doorway bodies at Huddersfield were a disaster, probably even worse than the Marshall Roadliners. Only they were given a major rebuild by Pennine including removal of the centre doorway did they become acceptable. My total experience of Swifts was the two Huddersfield Roe bodied ones which I remember more for AH505 engine problems than ones associated with the bodies. Perhaps the nadir was reached with the pair of Halifax Pennine bodied Fleetline SDs – now there was a pile of junk!

Ian Wild

15/01/14 – 05:56

Phil, thanks for all that – it answered my question, and then some. What are you like on Rootes-group offerings of the same period?
Michael, I suppose with coachwork the interest is in the aesthetic of the product, rather than what lies underneath. Two of the least-robust bodies of all time seem to have been semi-coaches produced for NBC towards the end of its existence . . . ECW’s B51(?) – its re-working of its early 1970s design; and Willowbrook’s offering of a couple of years earlier. Although I understand that some of these steel-framed BET standards suffered later in life, which seemingly accounted for the eagerness with which some BET companies snapped-up ECWs aluminium-framed offerings once they became available on the open-market.

Philip Rushworth

15/01/14 – 08:29

Ask away Philip.

Phil Blinkhorn

15/01/14 – 08:55

It depends on the extent of design cooperation and integrity. The B51 failed because the original was designed AROUND the RELH. When put on a mid-engined Leopard, the boot fell off into the road – for SELNEC/GMT, even before the B51 version. Strachans built the most successful Swifts with a floating rear, that is NOT tied to the chassis and therefore not prone to breaking the back of the chassis. The Willowbrooks were simply cheaply flung together with even less rust protection than the dreadful contemporary Duples. [Down to a price for NBC.] Most bodies were good but rear underfloor engined buses were new and most people had not even imagined the potential problem which became a major disaster. I read recently that the Weymann BETs were the best – and they were not by any means the most numerous. Likewise, apart from the nadir of the dreadful early ’60s (metal framed) bodies, Roe and Park Royal were among the very best.

David Oldfield

31/08/14 – 06:10

I was an inspector at Bolton depot 1969.
Reading all these comments brings back happy memories.

Vincent Fitzpatrick

ACK 774B_lr Vehicle reminder shot for this posting

20/10/15 – 06:59

Although an engineer, I never fully understood body construction! However, a few comments from my own career experiences:
I am interested to see comments that Strachans bodied Panthers survived better than Willowbrook bodied versions in the north. This was not my experience at Maidstone where the Strachans bodies moved amidships sufficient to cause aluminium dust to appear between all internal trim panels. Indeed Vin Owen, CE, got Willowbrook in (about 1971) to decide how to strengthen up the Strachans bodies, because the Willowbrook Panthers were sound! From what I recall, one feature of the strengthening was external curved steel angles fitted at the roof panel joints. I cannot recall the Panthers being much trouble otherwise although they were then at the back end of their lives. They were prone to engine fires, but that was a period when AEC 590 Reliances were also in similar trouble. I suspect that the single deck Fleetlines were introduced in Medway towns to replace Panthers. My only other memory is that the driving position seemed remarkably low and not very OMO friendly.
With regard to the ECW B51 body, I recall when at UCOC complaining to the seat manufacturer that the seat frame was cracking in the seat near the emergency door. I had the dubious pleasure of telling him a few days after he had visited to see, that I had discovered the reason for the cracking – the seat frame was holding the back of the body together! A huge modification programme was swiftly instituted by ECW.

Geoff Pullin


Quick links to the  -  Comments Page  -  Contact Page  -  Home Page



All rights to the design and layout of this website are reserved     Old Bus Photos does not set or use Cookies but Google Analytics will set four see this

Old Bus Photos from Saturday 25th April 2009 to Tuesday 11th August 2020